Showing posts with label QRP operation. Show all posts
Showing posts with label QRP operation. Show all posts

TNT Uncovered - Flea-Power (QRP) Telegraph Transmitter in the Pilot Radio's "Radio Design" magazine, 1930's

Pilot Radio And Tube Corporation, trade mark

I found this article in the Lloyds Dipsy Dumpster - site, where you can find a lot of rare vintage radio articles, manuals and data sheets.

It is remarkable, that "Pilot Radio & Tube Corporation", well known as a manufacturer of the great Super-Wasp receivers, was a publisher of a Ham-Radio literature, handbooks and magazines, as well as many of early radio manufacturing companies. As for me, I like that sort of advertising much more, than modern spam in my mailbox and if it would be possible, it should be a nice choice to make this QRP transmitter using a native Pilot's parts only.

Anyway, when I've read this article, one interesting fact has drawn my attention - I can recognize the TNT when I see a TNT design, but in the text this transmitter has been described as a TPTG.. Moreover, there is a grid capacitor on the assembles view, but with a opposite description below: "condenser is not needed". So, in the article we can see that mysterious moment, when as the chrysalis becomes the butterfly, TPTG transmitter was transformed into a trendy TNT.


6N7 Tube QRP Power Amplifier - One Rainy Day DIY Project

QRP 6N7 Tube Amplifier
Once upon a time I'd decided to join a Big Guns Gang and made a Super-Duper Powerful Vacuum Tube QRP amplifier for my 800mW QRPP homebrew telegraph vacuum tube transceiver "3T" (I promise to write a separate article or two about this three tube transceiver project later). It was not an easy decision to me because for that legendary time I'd almost a year used the QRPP power of less than a watt, but there was a rainy spring day, I've called CQ again and again without any takers and, at very last, somebody took over my only rock bound frequency. "That's all" - I said - "Enough!" ..and turned on my Soldering Iron.
Let me describe the scheme. Grounded-Grid design has been chosen because it is simple, easy to matching to coaxial impedance, provides the necessary level of amplification and typically requires no neutralization. After several experiments with triodes and double triodes I'd chose a 6N7S (6H7C) valve - Russian glass shaped version of well known 6N7 vacuum tube. I know that there was a 6N7G and 6N7GT American glass tubes, but as I heard these ones was not as common as metal 6N7.