Showing posts with label HOMEBREW. Show all posts
Showing posts with label HOMEBREW. Show all posts

TNT Uncovered - Flea-Power (QRP) Telegraph Transmitter in the Pilot Radio's "Radio Design" magazine, 1930's

Pilot Radio And Tube Corporation, trade mark

I found this article in the Lloyds Dipsy Dumpster - site, where you can find a lot of rare vintage radio articles, manuals and data sheets.

It is remarkable, that "Pilot Radio & Tube Corporation", well known as a manufacturer of the great Super-Wasp receivers, was a publisher of a Ham-Radio literature, handbooks and magazines, as well as many of early radio manufacturing companies. As for me, I like that sort of advertising much more, than modern spam in my mailbox and if it would be possible, it should be a nice choice to make this QRP transmitter using a native Pilot's parts only.

Anyway, when I've read this article, one interesting fact has drawn my attention - I can recognize the TNT when I see a TNT design, but in the text this transmitter has been described as a TPTG.. Moreover, there is a grid capacitor on the assembles view, but with a opposite description below: "condenser is not needed". So, in the article we can see that mysterious moment, when as the chrysalis becomes the butterfly, TPTG transmitter was transformed into a trendy TNT.


6N7 Tube QRP Power Amplifier - One Rainy Day DIY Project

QRP 6N7 Tube Amplifier
Once upon a time I'd decided to join a Big Guns Gang and made a Super-Duper Powerful Vacuum Tube QRP amplifier for my 800mW QRPP homebrew telegraph vacuum tube transceiver "3T" (I promise to write a separate article or two about this three tube transceiver project later). It was not an easy decision to me because for that legendary time I'd almost a year used the QRPP power of less than a watt, but there was a rainy spring day, I've called CQ again and again without any takers and, at very last, somebody took over my only rock bound frequency. "That's all" - I said - "Enough!" ..and turned on my Soldering Iron.
Let me describe the scheme. Grounded-Grid design has been chosen because it is simple, easy to matching to coaxial impedance, provides the necessary level of amplification and typically requires no neutralization. After several experiments with triodes and double triodes I'd chose a 6N7S (6H7C) valve - Russian glass shaped version of well known 6N7 vacuum tube. I know that there was a 6N7G and 6N7GT American glass tubes, but as I heard these ones was not as common as metal 6N7.

Second Life of Dead MFM Hard Drives - Iambic Paddle

Homebrew Iambic Paddle Just finished my first in life "Instructable" at the D.I.Y. host site instructables. It is short sketch about Iambic Paddle which has been made using a spare parts from the dead MFM HDD drive. I got a lot of fun posting to that site, and I think that it should be good idea to post more detailed article here. Frankly, this homebrew project is not a Pure Glowing Bug, but I'm not so puristic today.
Well, let me explain - why I decided to use HDD heads as a levers in this Iambic Paddle Project. For many years I've collected computer spare parts for no reason, just because I have a big, nearly endless Junk Box and it was impossible to me to throw such high-tech toys in the trash. But one morning I found that my Junk Box is full and The Time of Trash Bags has come. It was a hard work, but under the tons of debris I found the treasure - my first homemade Z80 Sinclair Spectrum and five old 5 inch MFM hard drives from my second computer.
As you remember, these drives was a big rounded shaped boxes, ideal as a chassis for any homemade electronic projects, tube glowbugs as well as solid state stuff. Another interesting things - powerful electromotor and magnetic cylinders itself, thick shiny discs which are so usable as a dial or scale part, looked much better than a CD in this role. And last but not least - yes, precision bearings on the easy to mount axis in magnetic head's block. What a beautiful hardware! When I opened and totally disassembled these hard drives, I realized that I literally had a very new telegraph key, usual one lever, dual lever iambic paddle or even straight key - not so important, it is easy to make any kind of telegraph manipulator using these nice spare parts. Watch this video demonstrating a working Iambic Paddle and take a look at step by step constructing process here:

Evergreen Exciter for the Special Night

Magic Eye Transmitter
Several days ago I listened to the completely empty ten meters band. There was a lot of noises, quiet CB chewing and nothing else.
Suddenly I heard a slow, quiet, but very clear telegraph code, resembling W1AW QST. I have not heard the beginning, but wrote all heard:

Straight Key Night M.O.P.A. Transmitter

SKN Operating Position
After reading a lot of ancient QSTs, ARRL and Jones Handbooks plus e-mail conversations with my friend, Louis VE3AWA about American depression-era style rig design, I decided to build a classic breadboard transmitter in time for Straight Key Night.

Well, breadboard MOPA seemed like a very interesting idea, it was absolutely unusual for me - I never used wooden chassis (breadboard) without any metal shielding before. Second problem - I'd started this project too late, for only one week before the SKN.
To my surprise, I got my firefly finished and fired-up during Straight Key Night! Without any success - there was no SKN participants over here. But what done is done and I was so glad to hear many "loud and clear" signal reports and heartwarming words from EU CW stations. Maybe next SKN, VE and W stations will make a sked to work UU1CC.